Mitsubishi Electric GOT2000 Series Connection Manual page 463

■5. Serial (MELSEC) (GS)
Item
Transmission Speed
Retry
Timeout Time
Delay Time
*1
Format
Servo axis switching device
head No.
*1 Refer to POINT of Communication driver A/QnA/L/Q CPU, LJ71C24 or QJ71C24.
Description
Set this item when change the transmission speed used for communication with
the connected equipment.
(Default: 115200bps)
When the setting exceeds the limit of the connected equipment, communication is
performed at the fastest transmission speed supported by the connected
equipment.
Set the number of retries to be performed when a communication error occurs.
(Default: 0time)
Set the time period for a communication to time out.
(Default: 3sec)
Set this item to adjust the transmission timing of the communication request from
the GOT.
(Default: 0ms)
Set the communication format.
(Default: 1)
Set the servo axis switching device head No.
(Default: 10)
For details, refer to the following POINT.
➠
(3) Indirect specification of the servo axis No.
Range
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
0 to 5times
3 to 30sec
0 to 300 (ms)
1, 2
0 to 2032
7.4 GOT Side Settings
7
7 - 31