Got Ethernet Setting - Mitsubishi Electric GOT2000 Series Connection Manual

5.3.3

GOT Ethernet Setting

The GOT can be connected to a different network by configuring the following setting.
■1. GOT IP address setting
Set the following communication port setting.
• Standard port (When using GT25-W, port 1)
• Extension port (When using GT25-W, port 2)
■2. GOT Ethernet common setting
Set the following setting which is common to the standard port and the extension port, or port 1 and port 2.
• [Default Gateway]
• [Peripheral S/W Communication Port No.]
• [Transparent Port No.]
■3. IP filter setting
By configuring the IP filter setting, the access from the specific IP address can be permitted or shut off.
For the detailed settings, refer to the following manual.
➠
5 - 22
5.3 GOT Side Settings
1.1.2 GOT Ethernet Setting