Cc-Link Connection (Via G4) - Mitsubishi Electric GOT2000 Series Connection Manual

4.2.4

CC-Link Connection (Via G4)

This section explains the CC-Link connection (via G4) that connects the GOT to the AJ65BT-G4-S3 of the CC-Link network.
The following shows an example of connecting the GOT to the AJ65BT-G4-S3 of the CC-Link network.
Network No. 0, Station No. 0
(Master station)
Monitor target
Control
system
(System A)
■1. Connection method
Connect the AJ65BT-G4-S3 of the CC-Link network to the GOT.
For details, refer to the following.
➠
■2. GT Designer3 setting
Set GT Designer3 as follows.
Setting item
Controller Type
Device setting (Network setting)
MELSEC Redundant Setting
4 - 66
4.2 MELSEC Q Series
CC-Link
MELSECNET/H remote I/O network
13. CC-Link CONNECTION (Via G4)
MELSEC-QnA, MELDAS C6*
Host
Do not set the item.
Network No. 0, Station No. 1
(Standby master station)
Settings
Network No. 0, Station No. 2
(AJ65BT-G4-S3)
GOT
Standby system
(System B)
Model