Mitsubishi Electric GOT2000 Series Connection Manual page 1069

(4) When connecting the GOT and PLC in CC-Link IE Controller Network
The following shows the software and the accessible PLC CPUs.
PLC CPU
RCPU
QCPU (Q mode), C Controller module (Q Series)
Motion controller CPU (Q Series)
(Q170MCPU,Q170MSCPU,Q170MSCPU-S1 only)
*1 GX Works2 Version 1.525X or later is required to use the FA transparent function.
*2 GX Works3 Version 1.025B or later is required to use the FA transparent function.
*3 GX Works3 Version 1.030G or later is required to use the FA transparent function for the RCPU redundant system.
(5) When connecting the GOT and PLC in CC-Link IE Field Network
The following shows the software and the accessible PLC CPUs.
PLC CPU
RCPU
FX5U, FX5UC
QCPU (Q mode)
Motion controller CPU (Q Series)
(Q170MCPU,Q170MSCPU,Q170MSCPU-S1 only)
LCPU
*1 GX Works2 Version 1.545T or later is required to use the FA transparent function.
*2 GX Works3 Version 1.030G or later is required to use the FA transparent function
*3 GX Works3 Version 1.030G or later is required to use the FA transparent function for the RCPU redundant system.
*4 GX Works3 Version 1.035M or later is required to use the FA transparent function.
(6) When connecting the GOT and PLC in Ethernet
The following shows the software and the accessible PLC CPUs.
PLC CPU
QCPU (Q mode)
Motion controller CPU (Q Series)
(Q170MCPU,Q170MSCPU,Q170MSCPU-S1 only)
LCPU
*1 GX Works2 Version 1.565P or later is required to use the FA transparent function.
*2*3
GX Works3
*1
GX Works2
*1
GX Works2
*2*3
GX Works3
*4
GX Works3
*1
GX Works2
*1
GX Works2
*1
GX Works2
*1
GX Works2
*1
GX Works2
*1
GX Works2
22.2 Compatible Software
Software
Software
Software
22
22 - 13