Mitsubishi Electric GOT2000 Series Connection Manual page 686

(b) Station information setting
• Station information setting of station No.1 (GOT)
Station type
Exclusive station count
Reserve/invalid station select
Intelligent buffer select (word)
• Station information setting of station No.2 (GOT)
Station type
Expanded cyclic setting
Exclusive station count
Reserve/invalid station select
Intelligent buffer select (word)
*1
*2
12 - 44
12.4 PLC Side Setting
*1
Item
*2
*1
Item
*2
*2
When the [Mode] of the CC-Link module is set at [Remote net - (Ver. 2 mode)], [Remote station points] can be set.
[Remote station points] is a setting for the remote I/O station.
The default value (32 points) must be used on the GOT.
Set the same setting as that of the GOT.
POINT POINT POINT
When changing the network parameter
After writing the network parameter to the PLC CPU, operate the PLC CPU ether turning OFF
and then ON or resetting.
Set value
Ver.1 intelligent
device station (fixed)
Exclusive station 1
No setting
(Use default value)
: Necessary
Set value
Ver.2 intelligent device station (fixed)
Single
Exclusive station 1
No setting
(Use default value)
: Necessary
Setting necessity at GOT
connection
: As necessary : Not necessary
Setting necessity at GOT
connection
: As necessary : Not necessary