Connecting Serial Communication Module (Melsec Iq-R Series) - Mitsubishi Electric GOT2000 Series Connection Manual

7.5.1

Connecting serial communication module (MELSEC iQ-R Series)

■1. [Module parameter] of GX Works3
The PLC can communicate with the GOT with the default module parameter setting.
POINT POINT POINT
Serial communication module (MELSEC iQ-R Series)
For details of the serial communication module (MELSEC iQ-R Series), refer to the following
manual.
➠ Manuals of MELSEC iQ-R Series
POINT POINT POINT
(1) When changing the module parameter
After writing module parameters to the PLC CPU, turn the PLC CPU OFF then back ON
again, or reset the PLC CPU.
(2) Connection of multiple GOTs
To some serial communication module models, two GOTs can be connected using both CH1
and CH2.
7.5 PLC Side Setting
7
7 - 35