Melsecnet/10 Connection (Plc To Plc Network) - Mitsubishi Electric GOT2000 Series Connection Manual

17.2.2

MELSECNET/10 connection (PLC to PLC network)

MELDAS
C6/C64
CNC
Model name Expansion unit
FCU6-EX878
MELDAS C6/C64
FCU6-EX879
*1
*2
*3
*4
17 - 4
17.2 System Configuration
POINT POINT POINT
(1) Connectable network
MELSECNET/10 connection includes the case that MELSECNET/H is used in NET/10
mode.The GOT cannot be connected to the remote I/O network.
Connect the GOT to the following network systems as an ordinary station.
• MELSECNET/10 network system (PLC to PLC network) optical loop system
• MELSECNET/10 network system (PLC to PLC network) coaxial bus system
(2) MELSECNET/H network module
When connecting the MELSECNET/H network module to the MELSECNET/10 network
system, specify the MELSECNET/10 Mode as a network type.
Expansion
unit
Communication type
MELSECNET/10
(Coaxial bus system)
MELSECNET/10
(Optical loop system)
The overall extension cable length and the length between stations vary depending on the cable type to be used and the total
number of stations.
For details, refer to the following manuals.
➠
C6/C64/C64T CONNECTION AND MAINTENANCE MANUAL BNP-B2255
➠
C6/C64/C64T NETWORK INSTRUCTION MANUAL BNP-B2373
Specify the MELSECNET/10 Mode as the Communication Settings.For the setting, refer to the following.
➠
17.4.1 Setting communication interface (Controller Setting)
For the coaxial cable and optical fiber cable, refer to the following manuals.
➠
C6/C64/C64T CONNECTION AND MAINTENANCE MANUAL BNP-B2255
➠
C6/C64/C64T NETWORK INSTRUCTION MANUAL BNP-B2373
GT25-W, GT2505-V does not support the option device.
Connection cable
Connection cable
Max.
Cable model
distance
Coaxial cable
*1
*3
Optical fiber cable
*1
*3
Communication driver
GOT
MELSECNET/H
(When MELSECNET/H
communication unit is used)
GOT
*4
Model
Option device
*2
GT15-J71BR13
*2
GT15-J71LP23-25
Number of
connectable
equipment
31 GOTs
63 GOTs