The following connection methods are available for the QCPU redundant system.
• Connection to remote I/O station in MELSECNET/H network system
Direct CPU connection (Remote I/O station of MELSECNET/H network system)
➠
• Serial communication connection (Serial communication module mounted on remote I/O station of MELSECNET/H
network system)
➠
• Ethernet connection (Ethernet module mounted on the remote I/O station of the MELSECNET/H network system)
➠
• Direct CPU connection
➠
• CC-Link connection (intelligent device station)
➠
• CC-Link connection (Via G4)
➠
• MELSECNET/H connection, MELSECNET/10 connection (Network system)
➠
• CC-Link IE Controller Network connection (Network system)
➠
• Ethernet connection
➠
• Connection to the redundant type extension base unit
Serial communication connection (Serial communication module mounted on the redundant type extension base unit)
➠
Ethernet connection (Ethernet module mounted on the redundant type extension base unit)
➠
CC-Link connection (intelligent device station) (CC-Link module mounted on the redundant type extension base unit)
➠
CC-Link connection (Via G4) (CC-Link module mounted on the redundant type extension base unit)
➠
For details of PLC CPUs that can be monitored in each connection method of GOT, refer to the following.
➠
4 - 50
4.2 MELSEC Q Series
■1.Direct CPU connection (Direct CPU connection to the remote I/O station)
■2.Serial communication connection (Connection to serial communication module mounted on
remote I/O station)
■3.Ethernet connection (Connection to Ethernet module mounted on remote I/O station)
4.2.2Direct CPU Connection
4.2.3CC-Link Connection (Intelligent Device Station)
4.2.4CC-Link Connection (Via G4)
4.2.5MELSECNET/H and MELSECNET/10 Connections (Network Systems)
4.2.6CC-Link IE Controller Network Connection (Network System)
4.2.7Ethernet Connection
■1.Serial communication connection (Connection to the Serial communication module mounted
on the redundant type extension base unit)
■2.Ethernet connection (Connection to the Ethernet module mounted on redundant type
extension base unit)
■3.CC-Link connection (intelligent device station) (Connection to the CC-Link module mounted on
redundant type extension base unit)
■4.CC-Link connection (Via G4) (Connection to the CC-Link module mounted on redundant type
extension base unit)
Monitorable controllers of each chapter