Connecting Aj65Bt-R2N - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

13.5.2

Connecting AJ65BT-R2N

This section describes the settings of the GOT and peripheral connection module in the following case of the system
configuration.
■1. System configuration
*1
■2. Switch setting of peripheral connection module
Set the station number setting switch, data link transmission speed setting switch, and operation setting DIP switch.
(1) Station number setting switch
Station number setting switch
13 - 20
13.5 PLC Side Settings
POINT
POINT
POINT
(1) Peripheral connection module
For details of the peripheral connection module, refer to the following manual.
Peripheral Connection Module Type AJ65BT-R2N User's Manual
(2) CC-Link module
For details of the CC-Link module, refer to the following manual.
CC-Link System Master/Local Module User's Manual QJ61BT11N
(3) CC-Link built-in CPU
For details on the CC-Link function built-in CPU, refer to the following manual.
MELSEC-L CC-Link System Master/Local Module User's Manual
<CC-Link module>
Station type
Station No.
Mode
All connect count
Transmission speed
The Start I/O No. of the CC-Link module is set to "0"
AJ65BT-R2N station number
setting
*1
Setting example
: Master station
: Station No. 0
: Remote net (Ver.1 mode)
: 1
: 156kbps
<GOT>
Setting example
Transmission speed: 9600bps
<AJ65BT-R2N>
Setting example
Station type
: Intelligent device station
Station No.
: Station No. 1
: Exclusive station 1
Number of stations occupied
Transmission speed
: 156kbps
(3)
(2)
(1)
2
Description
: Necessary
4
(4)
Setting necessity at GOT
Set value
connection
1 to 64
: As necessary
: Not necessary

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents