■2. Utility setting for C Controller module (Q Series)
(1) Q12DCCPU-V
Use SW3PVC-CCPU-E Ver.3.05F or later for the C Controller (Q Series) setting utility.
(a)
Connection settings
*1
Target module
Write authority
*2
User name
*2
Password
Detailed settings
*1
If the IP address of the C Controller module (Q Series) has been changed, input the changed IP address or host name.
*2
If the account of the C Controller module (Q Series) has been changed, input the changed user name and password.
(b)
Online operation
Detailed settings
Item
Item
Set value
192.168.3.3 (Default)
Mark the checkbox
target
password
-
: Necessary
: As necessary
Set value
Refer to (3)
: Necessary
: As necessary
5.4 PLC Side Setting
5
Setting necessity at
GOT connection
: Not necessary
Setting necessity at GOT
connection
: Not necessary
5 - 69