Mitsubishi Electric GOT2000 Series Connection Manual page 1135

Step 5.
Network No. and Station No. are not required to be changed (default) because they are not used.
Step 6.
Double-click [GOT] of the PLC side I/F to display [PLC side I/F Detailed Setting of GOT].
Step 7.
Set the IP address and port No. in [Ethernet detail setting for PC and GOT connection].
Set the IP address and port No. to the same as the Ethernet download setting.
➠ 22.6.1 ■2. (2) Ethernet download setting
Step 8.
Check-mark [CC IE Field] in [Detail setting for GOT and PLC connection].
Step 9.
Set the [CPU mode] and [Relay network No.] and [Relay station No.].
• When the target PLC has the same network No. as that of the GOT
Set the number assigned to the PLC that is targeted by using the transparent function and CC-Link
IE field network module.
• When the target PLC has a different network No. from that of the GOT
Set the number assigned the PLC that is used as a relay station and CC-Link IE field network
module.
22.7 Personal Computer Side Setting
22
22 - 79