Cc-Link(Id) Connection To Meldas C6/C64 - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

CC-Link(ID) connection to MELDAS C6/C64

■1. Parameter setting

Set parameters related to CC-Link connection with GX Developer and write them to CNC by PLC. However, in the case

of using the local stations, it is not necessary to set the network parameters.

(1) Master station parameter

It is necessary to set and write the network parameters to CNC with GX Developer. The following shows an example

of parameter settings.Set the first I/O No. as follows according to the expansion slot to which the unit is inserted.

Start I/O No.

Example of GX Developer setting

For details of the parameter setting, refer to the following.

C6/C64/C64T NETWORK INSTRUCTION MANUAL BNP-B2373

Start I/O No.

17.5 CNC Side Settings

Show Quick Links

Table of Contents