Mitsubishi Electric GOT2000 Series Connection Manual page 842

■2. Communication detail settings
Make the settings according to the usage environment.
Item
Transmission Speed
Data Bit
Stop Bit
Parity
Retry
Timeout Time
Host Address
Delay Time
Station No. Selection
15 - 20
15.4 GOT Side Settings
Set this item when change the transmission speed used for communication with the
connected equipment.
(Default: 9600bps)
Set this item when change the data length used for communication with the connected
equipment.
(Default: 8bit)
Specify the stop bit length for communications.
(Default: 1bit)
Specify whether or not to perform a parity check, and how it is performed during
communication.
(Default: Even)
Set the number of retries to be performed when a communication timeout occurs.
(Default: 3times)
Set the time period for a communication to time out.
(Default: 3sec)
Specify the station number of the servo amplifier in the system configuration.
(Default: 0)
Set this item to adjust the transmission timing of the communication request from the
GOT.
(Default: 0ms)
Specify whether to use the station No. during communication.
If [Yes] is selected, the station No. is fixed to "0."
(Default: Yes)
POINT POINT POINT
(1) Communication interface setting by Utility
The communication interface setting can be changed on the Utility's [Communication
Settings] after writing [Controller Setting] of project data.
For details on the Utility, refer to the following manual.
➠
GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
POINT POINT POINT
Cutting the portion of multiple connection of the controller
By setting GOT internal device, GOT can cut the portion of multiple connection of the controller.
For example, faulty station that has communication timeout can be cut from the system.
For details of the setting contents of GOT internal device, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
Description Range
9600bps, 19200bps,
38400bps, 57600bps
115200bps
8bit (fixed)
1bit (fixed)
Even (fixed)
0 to 5times
1 to 30sec
0 to 31
0 to 300 (ms)
Yes/No