Mitsubishi Electric GOT2000 Series Connection Manual page 1062

(3) When connecting the GOT and PLC in serial communication connection
The following shows the software and the accessible PLC CPUs.
PLC CPU
RCPU
QCPU (Q mode)
LCPU
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10
*11
22 - 6
22.2 Compatible Software
GX Works3
MELSOFT Navigator
GX Works2
PX Developer
GX Developer
MX Component
GX LogViewer
CPU Module Logging Configuration Tool
MELSOFT Navigator
GX Works2
GX Developer
MX Component
GX LogViewer
CPU Module Logging Configuration Tool
MELSOFT Navigator Version 1.71Z or later is required to use the FA transparent function.
GX Works2 Version 1.497T or later is required to use the FA transparent function.
PX Developer Version 1.40S or later is required to use the FA transparent function.
MX Component that you can use the FA transparent function is scheduled to be supported soon.
The MX Sheet, please use the MX Component (will be supported soon).
GX LogViewer Version 1.32J or later is required to use the FA transparent function.
CPU Module Logging Configuration Tool Version 1.32J or later is required to use the FA transparent function.
MX Component Version 4.06G or later is required to use the FA transparent function.
MX Sheet, please use the MX Component (Version 4.06G or later).
GX Developer Version 8.118Y or later is required to use the FA transparent function.
GX Works3 Version 1.030G or later is required to use the FA transparent function for the RCPU redundant system.
*11 *8
, MX Component , MX Sheet
*1
*2
*3
*10
*4 *5
,MX Sheet
*6
*7
*1
*2
*10
*4 *5
,MX Sheet ,
*6
*7
Software
*9