Mitsubishi Electric GOT2000 Series Connection Manual page 537

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

For the coaxial cable, refer to the following manual.

Q corresponding MELSECNET/H Network System Reference Manual (PLC to PLC network)

For QnA/Q4AR MELSECNET/10 Network System Reference Manual

For AnU MELSECNET/10 Network System Reference Manual (PLC to PLC network)

For the coaxial cable connector connection method, refer to the following.

1.4.2 Coaxial cableconnector connection method

The overall extension cable length and the length between stations vary depending on the cable type to be used and the total

number of stations.

For details, refer to the following manual.

Q corresponding MELSECNET/H Network System Reference Manual (PLC to PLC network)

For QnA/Q4AR MELSECNET/10 Network System Reference Manual

For AnU MELSECNET/10 Network System Reference Manual (PLC to PLC network)

Set the MELSECNET/10 mode in the communication settings. For the setting, refer to the following.

9.3.1 Setting communication interface (Controller Setting)

GT25-W, GT2505-V does not support the option device.

9.2 System Configuration

Show Quick Links

Chapters

Table of Contents