Ethernet Module - Mitsubishi Electric GOT2000 Series Connection Manual

5.1.2

Ethernet module

CPU series
MELSEC iQ-R Series
Motion controller CPU (MELSEC iQ-R Series)
CNC C80 (R16NCCPU-S1)
CR800-R(R16RTCPU)
MELSEC-Q (Q mode)
MELSEC-QS
Motion controller CPU (Q Series)
CNC C70
Robot controller (CRnQ-700)
MELSEC-QnA
MELSEC-Q (A mode)
MELSEC-A
Motion Controller CPU (A Series)
MELSEC-FX
CC-Link IE Field Network Ethernet adapter module
MELSEC-L
*1
*2
*3
5 - 8
5.1 Connectable Model List
RJ71EN71
QJ71E71-100 QJ71E71-B5 QJ71E71-B2 QJ71E71
AJ71QE71N3-T
AJ71QE71N-B5T
A1SJ71QE71N-B5
A1SJ71QE71-B5 A1SJ71QE71-B2
AJ71E71N3-T AJ71E71N-B5 AJ71E71N-B2 AJ71E71N-T
AJ71E71N-B5T AJ71E71-S3 A1SJ71E71N3-T A1SJ71E71N-B5
A1SJ71E71N-B2 A1SJ71E71N-T A1SJ71E71N-B5T A1SJ71E71-B5-S3
A1SJ71E71-B2-S3
FX3U-ENET-L FX3U-ENET-ADP
NZ2GF-ETB
LJ71E71-100
If the A series Ethernet module is applied to the QnACPU, the GOT can monitor the devices as the same as the case of AnACPU.
However, the following devices cannot be monitored.
• Devices added to QnACPU
• Latch relays (L) and step relays (S)
(In case of QnACPU, the latch relay (L) and step relay (S) are different from the internal relay. However, whichever is specified,
an access is made to the internal relay.)
• File register (R)
Use B or a later function version of Ethernet module and PLC CPU.
Use firmware version 12 or higher when building a redundant system.
Ethernet module
*3
*2 *2
AJ71QE71N-B5 AJ71QE71N-B2
*2
AJ71QE71 AJ71QE71-B5 A1SJ71QE71N3-T
*2 *2
A1SJ71QE71N-B2 A1SJ71QE71N-T
*1
*2 *2
AJ71QE71N-T
*2
*2 *2
A1SJ71QE71N-B5T