Mitsubishi Electric GOT2000 Series Connection Manual page 882

■8. MELSERVO-J3-*T
Bit device
Word device
Double word device
*1
*2
*3 MCD cannot be used as a real number.
*4
*5
*6
15 - 60
15.6 Device Range that Can Be Set
*5
Device name
Servo amplifier request (SP)
Operation mode selection (OM)
Instruction demand (for test operation) (TMB)
Basic setting parameter (PA)
*1
Gain filter parameter (PB)
Extension setting parameter (PC)
*1
I/O setting parameter (PD)
*1
Option unit parameter (PO)
*4
Status display (ST)
*4
Alarm (AL)
*6
External input (DI)
*4
External output (DO)
*2
Point table (position) (POS)
*2
Point table (speed) (SPD)
Point table (acceleration time constant) (ACT)
Point table (deceleration time constant) (DCT)
*2
Point table (dwell) (DWL)
Point table (auxiliary function) (AUX)
*2*3
Point table (M code) (MCD)
Input signal for test operation (for test operation) (TM0)
Forced output of signal pin (for test operation) (TMO)
Set data (for test operation) (TMD)
Use 1 to 50 of PA, PB, PC, PD, and PO when the GOT writes data to RAM of the servo amplifier.
Use 1001 to 1050 of PA, PB, PC, PD, and PO when the GOT write data to E
Use PA,PB,PC,PD,PO 1001 to 1050 when reading parameters to the servo amplifier RAM.
When the GOT writes data to point tables, use 1001 to 1255 of POS, SPD, ACT, DCT, DWL, AUX, and MCD (E
Even if the GOT writes a value to POS, SPD, ACT, DCT, DWL, AUX, or MCD (1 to 255) in the RAM area, the value is not
reflected.
Only reading is possible.
The GOT cannot read or write data from/to consecutive devices.
Only reading is possible for DI0 to DI4.
SP0 to SP6
OM0 to OM5
TMB1 to TMB6
PA1 to PA19
*1
PA1001 to PA1019
PB1 to PB45
PB1001 to PB1045
PC1 to PC50
*1
PC1001 to PC1050
PD1 to PD30
PD1001 to PD1030
PO1 to PO35
PO1001 to PO1035
ST0 to ST17
AL0 to AL1
AL11 to AL28
AL200 to AL205
AL210 to AL215
AL230 to AL235
DI0 to DI7
DO0 to DO4
POS1 to POS255
POS1001 to POS1255
SPD1 to SPD255
SPD1001 to SPD1255
ACT1 to ACT255
*2
ACT1001 to ACT1255
DCT1 to DCT255
*2
DCT1001 to DCT1255
DWL1 to DWL255
DWL1001 to DWL1255
AUX1 to AUX255
*2
AUX1001 to AUX1255
MCD1 to MCD255
MCD1001 to MCD1255
TMI0 to TMI2
TMO0 to TMO1
TMD0 to TMD1
TMD3
Setting range
2
PROM of the servo amplifier.
Device No.
representation
Decimal
Decimal
2
PROM area).