Connecting To The Melservo-J4, J3 Series - Mitsubishi Electric GOT2000 Series Connection Manual

15.2.3

Connecting to the MELSERVO-J4, J3 Series

■1. When directly connecting the GOT to a servo amplifier
(1) When connecting to one servo amplifier
Servo RS-422/232
amplifier
Servo amplifier
RS-422/232 interface
Series name converter RS-422/232
conversion cable
DSV-CABV(1.5m)
or
FA-T-RS40VS
MELSERVO-
*1
J4-A ,
MELSERVO-
*1
J4-A-RJ ,
MELSERVO
*1
J3-A
-
*1 Connect the connector of the servo amplifier to CN3.
*2 DSV-CABV is a product manufactured by Diatrend Corporation. For details, contact Diatrend Corporation.
*3 FA-T-RS40VS is a product manufactured by MITSUBISHI ELECTRIC ENGINEERING COMPANY LIMITED. For details, contact
MITSUBISHI ELECTRIC ENGINEERING COMPANY LIMITED.
The cables (RS-PCATCBL-0.5M(0.5m), RS-422SCBL-2M(2m)) are packed together.
Use the provided cables to connect devices.
* FA-T-RS40VS stopped being produced at the end of March, 2013. The replacement product is not produced.
*4 When a GT10-C02H-6PT9P unit of the sub version A or B is used, do not ground the case of the D-sub (9-pin) connector.
*5 GT25-W, GT2505-V does not support the option device.
converter
Connection cable
Cable model
Communication
Connection
type
diagram number
*2
RS-232
*3
connection
diagram 2)
connection
diagram 2)
RS-422
connection
diagram 7)
GOT
Connection cable
Max.
Option device
distance
- (Built into GOT)
- 15m GT15-RS2-9P
GT10-C02H-
6PT9P
RS-232
15m
(Built into GOT)
- (Built into GOT)
RS-422
GT15-RS4-9S
30m
GT10-C02H-9SC
RS-422
- (Built into GOT)
15.2 System Configuration
Communication driver
MELSERVO-J4, J3, J2S/M, JE
GOT
Number of
connectable
*5
Model
equipment
*4
-
1 GOT for
1 servo amplifier
15
15 - 7