Mitsubishi Electric GOT2000 Series Connection Manual page 571

■3. [Network parameter] of GX Developer
(1) Network parameter
Network type
Start I/O No.
*1
Network No.
Total stations
Network range assignment
Refresh parameters
Interlink transmission parameters
Routing parameters
*1 Specify the same network No. as that of the network number setting switch of the MELSECNET/10 network module.
Item
9.5 PLC side setting when connecting to MELSEC/10
Set value
MNET/10
(Control station) (fixed)
0000H
1
2
Refer to (2)
(Use default value)
Refer to (3)
: Necessary : As necessary
Setting necessity at GOT
connection
9
: Not necessary
9 - 47