Mitsubishi Electric GOT2000 Series Connection Manual page 1016

(2) Settings of communication interface connecting to the second GOT
Step 1.
Select [Common]
Step 2.
The I/F Connection list window is displayed. Select the following.
• I/F-1: RS422/485
CH No.: 9
Driver: Host (PC)
Click the [OK] button when settings are completed.
(3) [Transparent] setting
Step 1.
Select [Common]
Step 2.
After [Controller CH No.] is displayed, check the channel No. connected to the target PLC of multiple
GOTs.
For details of connectable models, refer to the following.
➠
➠
Click the [OK] button when settings are completed.
20 - 14
20.4 GOT Side Settings
[I/F Communication Setting] from the menu.
[Environment Setup]
6. DIRECT CONNECTION TO CPU
7. SERIAL COMMUNICATION CONNECTION
2.
[GOT Setup]
Click!
[Transparent Mode Setup] from the menu.