Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

2.4

GOT Side Settings

2.4.1
Setting communication interface (Communication settings)
Set the channel of the equipment to be connected to the GOT.
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set the following items.
• Manufacturer: IAI
• Controller Type: Set either of followings.
<Connecting to X-SEL, SSEL, ASEL, PSEL>
IAI X-SEL Controller
<Connecting to PCON, ACON, SCON, ERC2>
IAI ROBO CYLINDER
• I/F: Interface to be used
• Driver: Set either of followings.
<Connecting to X-SEL, SSEL, ASEL, PSEL>
IAI X-SEL
<Connecting to PCON, ACON, SCON, ERC2>
IAI ROBO CYLINDER
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
Click the [OK] button when settings are completed.
2 - 26
2.4 GOT Side Settings
2.
[Controller Setting] from the menu.
2.4.2 Communication detail settings
POINT
POINT
POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
1.1.3 I/F communication setting
3.
4.
Click!

Advertisement

Table of Contents
loading

Table of Contents