Mitsubishi Electric GOT2000 Series Connection Manual page 1036

(3) For GS
For GS, the combinations of the Ethernet connection and the serial connection are available as shown in the
following table.
Ethernet
Ethernet connection
connection
Direct CPU connection
Computer link connection
CC-Link connection (via G4)
Inverter connection
Servo amplifier connection
Serial
connection
Third party PLC connection (Serial connection)
Microcomputer Connection (Serial)
MODBUS/RTU connection
The number of channels and the functions that can be used differ depending on the GOT to be used.
The table below shows the allowable combinations of connection types, the number of channels and restricted
functions.
Item Allowable combination of connection types
• Ethernet connection: 1 to 2 channels
(a)
• Serial connection: 1 to 2 channels
(b) • Serial connection: 2 channels
*1
*2
21 - 12
21.3 GOT Side Settings
Connection type
When the functions below are used, the connectable number of channels may be restricted depending on the combination of the
functions to be used.
• Barcode function • RFID function
For details, refer to the following.
➠
21.3.4 Determining the GOT side interface (Interface selection)
When a GOT and PLC are connected by Ethernet connection, connecting a GOT and a personal computer by Ethernet is not
allowed.
5. Ethernet connection
6. Direct CPU connection
7. Computer link connection
13. CC-Link connection (via G4)
14. Inverter connection
15. Servo amplifier connection
Non-Mitsubishi Electric Products 1
• 4. CONNECTION TO OMRON PLC 4.2 Serial Connection
• 6. CONNECTION TO KEYENCE PLC
• 15. CONNECTION TO PANASONIC INDUSTRIAL DEVICES SUNX PLC
Microcomputers, MODBUS/Fieldbus Products, Peripherals
• 2. MICROCOMPUTER CONNECTION (SERIAL)
Microcomputers, MODBUS/Fieldbus Products, Peripherals
• 5. MODBUS/RTU CONNECTION
Functions that are restricted by the connection
GOT to be used
GS
Max. 2 channels
Max. 2 channels
Reference
: Allowed : Restricted
*1
type
FA transparent function
USB Ethernet
*2
*2