Mitsubishi Electric GOT2000 Series Connection Manual page 333

■3. [Controller Setting] and [Ethernet] of GT Designer3
(1) Controller setting
GOT Net No.
GOT Station
GOT Standard Ethernet Setting
GOT Communication Port No.
Retry
Startup Time
Timeout Time
Delay Time
(2) GOT Standard Ethernet Setting
GOT IP Address
Subnet Mask
Default Gateway
Peripheral Communication Port No.
Transparent Port No.
(3) Ethernet setting
Ethernet setting No.1
*1 The following [Port No.] and [Communication format] can also be set.
[Port No.]: 5002
[Communication]: TCP
■4. Confirming the communication state of Ethernet module
(1) When using the Command Prompt of Windows.
Execute a Ping command at the Command Prompt of Windows.
(a) When normal communication
C:\>Ping 192.168.3.19
Reply from 192.168.3.19: bytes=32 time<1ms TTL=64
(b) When abnormal communication
C:\>Ping 192.168.3.19
Request timed out.
Item
Item
Item
Host
N/W No.
PLC No.
Type
IP address
*1
Port No.
*1
Communication
POINT POINT POINT
[Controller Setting] and [Ethernet] of GT Designer3
For [Controller Setting] and [Ethernet] of GT Designer3, refer to the following.
➠
5.3.1 Setting communication interface (Controller Setting)
Set value (Use default value)
1
1
192.168.3.18
5002
3times
3sec
3sec
0ms
Set value (Use default value)
192.168.3.18
255.255.255.0
0.0.0.0
5015
5014
Set value
*
1
2
QJ71E71
192.168.3.19
5001
UDP
5.4 PLC Side Setting
5
5 - 67