Mitsubishi Electric GOT2000 Series Connection Manual page 110

• Linear servo motor/DD motor setting parameter
Device name
PL1, PL1001
PL2, PL1002
PL3, PL1003
PL4, PL1004
PL5, PL1005
PL6, PL1006
PL7, PL1007
PL8, PL1008
PL9, PL1009
PL10 to PL16, PL1010 to PL1016
PL17, PL1017
PL18, PL1018
PL19 to PL48, PL1019 to PL1048
*1
*2
• Network setting parameter (MR-J4-□GF(-RJ) only)
Device name
PN01, PN1001
PN02, PN1002
PN03, PN1003
PN04, PN1004
PN05, PN1005
PN06, PN1006
PN07 to PN32, PN1007 to PN1032
*1
2 - 26
2.1 MELSEC iQ-R, RnMT/NC/RT, CR800-D (GT27, GT25 only)
Linear servo motor/DD motor function selection
1
Linear encoder resolution - Numerator
Linear encoder resolution - Denominator
Linear servo motor/DD motor function selection
2
Position deviation error detection level
Speed deviation error detection level
Torque/thrust deviation error detection level
Linear servo motor/DD motor function selection
3
Magnetic pole detection voltage level
For manufacturer setting
Magnetic pole detection - Minute position
detection method - Function selection
Magnetic pole detection - Minute position
detection method - Identification signal
amplitude
For manufacturer setting
For the parameters prefixed by an asterisk (*), setting becomes effective when the power is turned off once and back on after
setting the parameter data.
Compatible with MR-JE-□BF and MR-J4-GF(-RJ).
For manufacturer setting
Communication error detection time
Communication mode setting for CC-Link IE communication
CC-Link IE communication network number
Communication error detection frequency setting
Function selection N-1
For manufacturer setting
For the parameters prefixed by an asterisk (*), setting becomes effective when the power is turned off once and back on after
setting the parameter data.
*2
Item
Item
*1
Symbol
**LIT1
**LIM
**LID
*LIT2
LB1
LB2
LB3
*LIT3
LPWM
-
LTSTS
IDLV
-
*1
Symbol
-
CERT
**NEMD
**NENO
CERI
NOP1
-