(2) For CC-Link IE Controller Network system
Use [CC IE Control diagnostics...] of GX Developer to check if the GOT is correctly performed the data link.
For the GX Developer operation method, refer to the following manual.
➠
CC-Link IE Controller Network Reference Manual
(a)
Check the [Select station network device status display] (The display example on GX Developer
Version 8)
Startup procedure: GX Developer
Diagnostics]
(3) For CC-Link system
Use [Monitoring other station] of the GX Developer to check if the GOT is correctly performed the data link.
For the GX Developer operation method, refer to the following manual.
➠
CC-Link System Master/Local Module User's Manual QJ61BT11N
(a)
Check the [Status] (The display example on GX Developer Version 8)
Startup procedure: GX Developer
Monitoring other station
[Diagnostics]
[CC IE Control diagnostics...]
[Diagnostics]
[CC-Link / CC-Link LT diagnostics]
1.6 Checking for Normal Monitoring
[CC IE Control Network
1 - 51
1