Melsec-Ws - Mitsubishi Electric GOT2000 Series Connection Manual

2.9

MELSEC-WS

The device ranges that can be set when selecting [MELSEC-WS] as the controller type are as follows.
Input (I)
Output (Q)
Bit device Logic result (LQ)
Logic input (LI)
The bit specification of the word device
Data (byte)(D)
Data (word)(W)
EFI input (byte)(EI)
Word device
EFI output (byte)(EQ)
Logic input (byte)(LD)
Logic input (word)(LW)
Device
POINT POINT POINT
(1) Devices of MELSEC-WS
Only reading is possible for all devices.
(2) Device settings of MELSEC-WS
• Input(I), Output(Q)
Device
name
• Logic result(LQ), Logic input(LI)
Device
name
• EFI input(EI)
Device
name
• EFI output(EQ)
Device
name
Setting range
I1.1 to I12.8
Q1.1 to Q12.8
LQ0.0 to LQ3.7
LI0.0 to LI3.7
Setting range of each word device
D0 to D99
W0 to W49
EI110 to EI233
EQ10 to EQ22
LD0 to LD3
LW0 to LW1
Input position(1 to 8)
Module number(1 to 12)
Bit position(0 to 7)
Byte number(0 to 3)
Byte number(0 to 3)
Device number(1 to 3)
EFI number(1 to 2)
Byte number(0 to 2)
EFI number(1 to 3)
2.9 MELSEC-WS
Device No.
2
representation
Decimal
+Decimal
-
Decimal
Decimal
+Decimal
+Decimal
Decimal
+Decimal
Decimal
Decimal
2 - 67