Mitsubishi Electric GOT2000 Series Connection Manual page 87

■1. Setting item
(For MELSEC-Q/QS, Q17nD/M/NC/DR, CRnD-700)
(For MELSEC-FX)
Item
Set the device name, device number, and bit number.
The bit number can be set only by specifying the bit of word device.
When setting buffer memory (BM) and (G), set the buffer memory address in the space for the device number.
[R Block]
[SFC Block No.]
[Unit top I/O]
Intelligent
Device
function
module
[Unit No.]
[Mask type]
MELSEC-
FX buffer
memory
[Unit No.]
When selecting buffer memory (G) with the following controllers
MELSEC iQ-R, RnMT
MELSEC iQ-F
MELSEC-Q/QS, Q17nD/M/NC/DR, CRnD-700
MELSEC-L
MELSEC-QnA, MELDAS C6 *
When selecting a servo amplifier device for the following controllers
MELSEC iQ-R, RnMT
MELSEC iQ-F
MELSEC-Q/QS, Q17nD/M/NC/DR, CRnD-700
MELSEC-L
Description
Set the block number of the extended file register.
This item can be set only when the extended file register (ER) is selected.
This item can be set only when the step relay (block) (BLS) is selected.
Set the block number of the step relay (block).
Set when the buffer memory (BM) is selected.
Set the head I/O number of the buffer memory for the intelligent function module.
Set the first 2 digits of the 3-digit head I/O number.
Set when the buffer memory (G) is selected.
Set the head I/O number of the buffer memory for the intelligent function module.
Set the first 2 digits of the 3-digit head I/O number.
Set for using the buffer memory of MELSEC-FX series.2
Set the mask type for monitoring or writing only specified bits of the buffer memory.
➠
(4)Setting of the mask type (MELSEC-FX)
Set for using the buffer memory of MELSEC-FX series.
Set the module No. of the special function unit or special function block to monitor or write.
➠
(5)Setting of the module No. (MELSEC-FX)
2
2 - 3