Mitsubishi Electric GOT2000 Series Connection Manual page 131

• I/O setting parameter
Device name
PD1, PD1001
PD2, PD1002
PD3 to PD6,
PD1003 to PD1006
PD7, PD1007
PD8, PD1008
PD9, PD1009
PD10, PD1010
PD11, PD1011
PD12, PD1012
PD13, PD1013
PD14, PD1014
PD15, PD1015
PD16, PD1016
PD17, PD1017
PD18 to PD19, PD1018 to PD1019
PD20, PD1020
PD21 to PD29, PD1021 to PD1029
PD30, PD1030
PD31, PD1031
PD32, PD1032
PD33 to PD48, PD1033 to PD1048
*1 For the parameters prefixed by an asterisk (*), setting becomes effective when the power is turned off once and back on after
setting the parameter data.
Item
For manufacturer setting
Input signal automatic on selection 2
For manufacturer setting
Output device selection 1
Output device selection 2
Output device selection 3
For manufacturer setting
Input filter setting (Note)
Function selection D-1
Function selection D-2
Function selection D-3
Driver communication setting
Driver communication setting - Master -
Transmit data selection 1
Driver communication setting - Master -
Transmit data selection 2
For manufacturer setting
Driver communication setting - Slave - Master
axis No. selection 1
For manufacturer setting
Master-slave operation - Torque command
coefficient on slave
Master-slave operation - Speed limit coefficient
on slave
Master-slave operation - Speed limit adjusted
value on slave
For manufacturer setting
*1
Symbol
-
*DIA2
-
*DO1
*DO2
*DO3
-
*DIF
*DOP1
*DOP2
*DOP3
*IDCS
*MD1
*MD2
-
*SLA1
-
TLC
VLC
VLL
-
2.3 MELSEC iQ-F
2
2 - 47