PIM-SM
6 C
V
OMMANDS
6
-
-
IPV
PIM CISCO
REGISTER
CHECKSUM
ipv6 pim cisco-register-checksum
Overview
Use this command to configure the option to calculate the Register Checksum
over the whole packet. This command is used to inter-operate with older Cisco IOS
versions.
Use the no variant of this command to disable this option.
Syntax
ipv6 pim cisco-register-checksum
no ipv6 pim cisco-register-checksum
Default
This command is disabled by default. By default, Register Checksum is calculated
only over the header.
Mode
Global Configuration
awplus#
Example
awplus(config)#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
C613-50170-01 Rev B
configure terminal
ipv6 forwarding
ipv6 multicast-routing
ipv6 pim cisco-register-checksum
configure terminal
no ipv6 pim cisco-register-checksum
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1386