HP ProCurve 7102dl Reference Manual page 1337

SROS Command Line Interface Reference Guide Network Monitor Probe Command Set
expect regex <expression>
Use the expect regex command to configure the probe to expect a regular expression inside the contents of
the HTTP response message. If the regular expression does not match anything, the probe fails. Use the no
form of this command to return to the default.
Syntax Description
<expression> Specifies the expression to display.
Default Values
By default, no regular expression is defined.
Functional Notes
This command can only be executed while in the probe <name> http-request command set.
Usage Examples
The following example only allows the probe1 test to pass if the word success is found in the HTTP server
response message:
ProCurve(config)#probe probe1 http-request
ProCurve(config-probe-probe1)#expect regex success
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 1335