HP ProCurve 7102dl Reference Manual page 1356

Secure router sros command line interface
Table of Contents

Advertisement

SROS Command Line Interface Reference Guide Network Monitor Track Configuration Command Set
test list
Use the test list command to enter the Boolean Track Test List command set, which is used to specify
multiple objects (schedule or probe) to be tested. Use the no form of this command to remove the test list.
Variations of this command include:
test list and
test list or
The following additional subcommands are available once you have entered the Boolean Track Test List
Configuration Mode:
if probe <name>
if schedule <name>
if not probe <name>
if not schedule <name>
When using any command under the Boolean AND/OR track test list, it is important to
Note
remember how the logic will affect every object in the track test list.
Syntax Description
and
or
if [probe | schedule]
if not [probe | schedule]
<name>
Network monitoring probes and their associated names are created using the command
probe on page 485. Schedules are created and defined using the command schedule
Note
<name> on page 498. More information on interface commands is available in Global
Commands
Default Values
By default, a track list does not exist.
5991-2114
Specifies the relationship between all objects placed in this list. The
logical AND relationship means that all objects in this list must be in
the PASS state for the track test list to pass, or at least one object in
a FAIL state for the track test list to fail.
Specifies the relationship between all objects placed in this list. The
logical OR relationship means that only one of the objects in this list
must be in the PASS state for the track test list to pass, and all
objects in a FAIL state for the track test list to fail.
Specifies a single conditional test to be added to the test track list.
Specifies a single conditional test to be added to the test track list.
The not keyword indicates that the individual track state will negate
the result of the object test.
Specifies the name of the probe or schedule.
on page
363.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
1354

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve secure router 7203dl j8753a j8753a

Table of Contents