Specifications / Accessories / Options / Supplies - Toshiba e-STUDIO206L Service Manual

2.

SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES

2.1 Specifications
2.1.1 General
Type......................................... Desktop type (console type: when paper feed pedestal (PFP) and large
Original glass........................... Fixed type (the left rear corner used as guide to place originals)
Copy process .......................... Indirect electrophotographic process (dry)
Fixing method.......................... Halogen lamp (2 pieces) <Halogen lamp (3 pieces)>
Photosensor type .................... OPC
Original scanning sensor......... Linear CCD sensor
Scanning light source .............. e-STUDIO206L/256/306/356/456/506: Xenon lamp / LED
Reproduction ratio ................... Actual ratio: 100±0.5%
Resolution ............................... Scanning: 600 dpi x 600 dpi
Gradation................................. 256 steps
Paper feeding .......................... 2 drawers + Bypass feeding + LCF (optional)
Paper supply ........................... Standard drawers:
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
capacity feeder (LCF) are installed)
e-STUDIO207L/257/307/357/457/507: LED
Zooming: 25 to 400% in increments of 1%
(25 to 200% when using RADF)
Printing: Equivalent to 2400 dpi x 600 dpi
2 drawers + Bypass feeding + 2 PFP (optional)
Stack height 60.5 mm, equivalent to 550 sheets; 80 g/m
Bond)): Depends on destinations or versions.
Bypass feeding:
Stack height 11 mm: equivalent to 100 sheets; 80 g/m
Bond)
PFP:(Option):
Two drawer: stack height 60.5 mm, 550 sheets; 80 g/m
Bond)
LCF:(Option)
Stack height 110 mm x 2: equivalent to 1000 sheets; 80 g/m
lb. Bond)
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
2 - 1
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
2
2
(20 lb.
2
(20 lb.
2
(20 lb.
2
(20