Detection Of Abnormality; Types Of Abnormality; Description Of Abnormality - Toshiba e-STUDIO206L Service Manual

3.7.3

Detection of Abnormality

When something abnormal has occurred in the equipment, the symbols corresponding to the type of
abnormality are displayed.

[ 1 ] Types of abnormality

1. Abnormality cleared without turning OFF the door switch
(A) Add paper
(B) Pick-up failure in bypass
(C) Set key copy counter
2. Abnormality not cleared without turning OFF the door switch
(D) Misfeed in equipment
(E) Replace the toner cartridge
(F) EPU not installed properly
3. Abnormality not cleared without turning OFF the main power switch
(G) Call for service

[ 2 ] Description of abnormality

(A) Add paper
• Drawer empty sensor detects the presence or absence of paper.
[When drawer is not installed]
No drawer detected

Tray not going up (drawer empty sensor OFF)

"Add paper" displayed

[START] button disabled
[When drawer is installed]

Drawer detected

Tray going up (drawer empty sensor OFF)

"Add paper" displayed

[START] button disabled
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
3 - 33
OUTLINE OF THE MACHINE
3