Oob Management Ethernet Port Redundancy - Alcatel-Lucent 7450 Basic System Configuration Manual

Synchronization and Redundancy
Active CPM in Slot A has stopped
Slot B is now active CPM
Attempting to exec configuration file:
'cf3:/config.cfg' ...
...
Executed 49,588 lines in 8.0 seconds from file cf3:\config.cfg

OOB Management Ethernet Port Redundancy

The SR OS platform provides a resilient out-of-band (OOB) management Ethernet
redundancy mode for system management.
When the management Ethernet port is down on the active CPM, the OOB Ethernet
redundancy feature allows the active CPM to use the management Ethernet port of the
standby CPM, as shown in
OOB management Ethernet port redundancy is enabled using the
configure>redundancy>mgmt-ethernet-redundancy command.
248
Figure 11 and
Figure 11: Management Ethernet: Normal Mode
Active
CPM
Management Ethernet:
IP Address of Active
Figure 12
Standby
CPM
Management Ethernet:
IP Address of Standby
Management
Network
Basic System Configuration Guide
25169