Hcopy:device:language<1|2> Gdi | Wmf | Ewmf | Bmp; Hcopy[:Immediate<1|2>]; Hcopy:item:all; Hcopy:item:window<1|2>:Table:state On | Off - Agilent Technologies X Series User Manual

Compatible SCPI Commands
Supported SCPI Commands
Remote Command Notes
Preset
State Saved
HCOPy:DEVice:LANGuage<1|2> GDI | WMF | EWMF | BMP
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
State Saved
Range
HCOPy[:IMMediate<1|2>]
Initiates hard copy output. The numeric suffix specifies which printer configuration should be used for
the output. If there is no suffix, configuration 1 is selected.
Remote Command
Example
Remote Command Notes

HCOPy:ITEM:ALL

This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
HCOPy:ITEM:WINDow<1|2>:TABle:STATe ON | OFF
This command is accepted, but takes no action and reports no error.
Remote Command
Example
116
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
FSE, FSP, FSU
OFF
Saved in instrument state.
:HCOPy:DEVice:LANGuage[1]|2 GDI|WMF|EWMF|BMP
:HCOPy:DEVice:LANGuage?
HCOP:DEV:LANG GDI
HCOP:DEV:LANG?
FSE, FSP, FSU
Saved in instrument state.
GDI | WMF | EWMF | BMP
:HCOPy[:IMMediate]
HCOP:IMM
FSE, FSP, FSU
:HCOPy:ITEM:ALL
HCOP:ITEM:ALL
FSE, FSP, FSU
:HCOPy:ITEM:WINDow[1]|2:TABLe:STATe ON|OFF|1|0
:HCOPy:ITEM:WINDow[1]|2:TABLe:STATe?
HCOP:ITEM:WIND:TABL:STAT OFF
HCOP:ITEM:WIND:TABL:STAT?