Hcopy Subsystem; Hcopy:abort; Hcopy:cmap<1 To 26>:Default1|2|3; Hcopy:cmap<1 To 26>:Hsl <Hue>,<Sat>,<Lum - Agilent Technologies X Series User Manual

Compatible SCPI Commands
Supported SCPI Commands
The query returns the current state of this setting.
Remote Command
Example
Remote Command Notes
Preset

HCOPy Subsystem

The HCOPy subsystem controls the rendering of display information on output devices or to files.
Most of the HCOPy subsystem SCPI commands are accepted, but take no action and report no error.
There are two exceptions: HCOPy:ABORt and HCOPy[:IMMediate].

HCOPy:ABORt

Aborts hardcopy output.
Remote Command
Example
Remote Command Notes
HCOPy:CMAP<1 to 26>:DEFault1|2|3
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
HCOPy:CMAP<1 to 26>:HSL <hue>,<sat>,<lum>
This command is accepted, but takes no action and reports no error.
Remote Command
Example
114
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:FORMat[:DATA] ASCii|INTeger,32|REAL,32|REAL|64
:FORMat[:DATA]?
FORM REAL,32
FORM ASC
FSE, FSP, FSU
ASCii
:HCOPy:ABORt
HCOP:ABOR
FSE, FSP, FSU
:HCOPy:CMAP[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|
18|19|20|21|22|23|24|25|26:DEFault[1]|2|3
HCOP:CMAP:DEF
FSP, FSU
:HCOPy:CMAP[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|
18|19|20|21|22|23|24|25|26:HSL <real>,<real>,<real>
:HCOPy:CMAP[1]|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|
18|19|20|21|22|23|24|25|26:HSL?
HCOP:CMAP:HSL 0.3,0.8,1.0
HCOP:CMAP:HSL?