Rear Stabilizer Bar - Toyota Tercel 1985 Repair Manual

REAR AXLE AND SUSPENSION - Four Link Type Rear Suspension (4WD)
ne-St
Rear Stabilizer Bar
(See page RA-421
REMOVAL OF REAR STABILIZER BAR
1. REMOVE STABILIZER BAR BUSHING BRACKETS
2. REMOVE REAR STABILIZER BAR FROM BODY
3.
DISCONNECT STABILIZER BAR END FROM LINK
INSTALLATION OF REAR STABILIZER BAR
1. INSTATL STABILIZER LINK TO BODY
Install the link onto the body as shown.
2. INSTALL STABILIZER BAR TO LINK
Connect the stabilizer bar on both sides to the links with
bolts, collars, cushions, nut and new cotter pins.
Torque: 310 kg-cm (22 ft-\b,30 N'ml
3.
INSTALL BRACKETS TO REAR AXLE HOUSING
Torque: 375 kg-cm 127 ft-1b,37 N'm)