Changing the order of booting disk arrays
This section describes the procedure for changing the booting order in an
environment in which multiple disk arrays are set.
Normally, the highest order of booting is assigned to the disk array that was first set.
You can assign a disk array that has been built later, however, to the highest in the
boot order.
Select Virtual Drives from the main menu.
1
The following screen appears:
Set Boot Drive is followed by the number of the current
disk array being booted.
2
From the list displayed at the upper right of the screen, select a disk array for
which you want to set a boot device. Next, check Set Boot Drive and click Go.
303