Hitachi Compute Blade 2000 User Manual page 352

Checking disk arrays for consistency
This section describes how to check the consistency of disk arrays.
Consistency check can be done from MegaRAID Storage Manager. See the
MegaRAID Storage Manager in the DriverKit CD-ROM for information about how to
check consistency from the MegaRAID Storage Manager.
Consistency check on disk arrays can be executed only for
RAID 1, 5, 6, and 10.
1 Select Virtual Drives from the main menu.
The following screen appears:
2 From the list displayed at the upper right of the screen, select a disk array that
you want to check the consistency. Then check Properties and click Go.
The following screen appears:
301