Hitachi Compute Blade 2000 User Manual page 1646

(a) moduleConfigBlade group (4/25)
Object
No.
identifier
31 bladeInfoMa .1.3.6.1.4.1
ss .116.5.39.2
.2.1.1.28
32 bladeInfoFan .1.3.6.1.4.1
Rpm .116.5.39.2
.2.1.1.29
33 bladeInfoFan .1.3.6.1.4.1
AirVolume .116.5.39.2
.2.1.1.30
34 bladeInfoDet .1.3.6.1.4.1
ailHvmLicen .116.5.39.2
se .2.1.1.31
35 bladeInfoCa .1.3.6.1.4.1
pacityDimm .116.5.39.2
.2.1.1.32
36 bladeInfoDim .1.3.6.1.4.1
mRedundan .116.5.39.2
cy .2.1.1.33
37 bladeInfoTot .1.3.6.1.4.1
alAmountOf .116.5.39.2
Dimm .2.1.1.34
38 bladeInfoMa .1.3.6.1.4.1
nagementIp .116.5.39.2
Address .2.1.1.35
39 bladeInfoCp 1.3.6.1.4.1.
uInfoTable 116.5.39.2.
2.2
40 bladeInfoCp .1.3.6.1.4.1
uInfoEntry .116.5.39.2
.2.2.1
41 bladeInfoCp .1.3.6.1.4.1
uInfoIndex .116.5.39.2
.2.2.1.1
(*9) "Not install" is shown if no server blade installed or LPAR manager license not given to
the server blade,.
(*10) "Unknown" is shown if no information is obtained or no server blade is installed. This
value is determined when POST (Power-on self-test) is completed: a server blade is
powered on.
(*11) "0" is shown if no information is obtained or no server blade is installed.
OID Syntax
Integer32
Integer32
Integer32
DisplayString
Integer32
INTEGER
Integer32
DisplayString
Not-
Accessible
Not-
Accessible
Integer32
1595
Access Description
RO Shows the mass of the server
blade installed in the slot
shown in #5. This is shown
using the unit of 0.1kg. (*4)
RO Shows the max revolutions
per minute (rpm) value of the
fan in the server blade. This
value is always shown as 0.
RO Shows the max air volume
value provided by the fan in
the server blade. This value is
always shown as 0.
RO Shows the detailed LPAR
manager license value given
to the server blade installed in
the slot shown in #5. (*9)
RO Shows the max number of
DIMM slots to be installed in a
server blade.
RO Shows redundancy settings of
DIMM in the server blade. One
of the following values is
shown. (*10)
1: non-redundancy
2: unknown
3: memory-mirroring
4: online-spared-memory
RO Shows the max amount of
DIMM available for a server
blade. This value is shown as
1 for 1 GB. (*11)
RO Shows the IP address of
management port of server
blade of the slot shown in #5.
NA Show the information table on
the processor installed in the
server blade.
NA Shows the entry of the
information table on the
processor installed in the
server blade.
RO Shows the index of the
information table on the
processor installed in the
server blade.