Hitachi Compute Blade 2000 User Manual page 1650

(a) moduleConfigBlade group (8/25)
Object
No
identifier
68 bladeInfoIoIn .1.3.6.1.4.
fo2ProductM 1.116.5.3
anufacture 9.2.2.3.1.
13
69 bladeInfoDim .1.3.6.1.4.
mInfoTable 1.116.5.3
9. 2.2.4
70 bladeInfoDim .1.3.6.1.4.
mInfoEntry 1.116.5.3
9. 2.2.4.1
71 bladeInfoDim .1.3.6.1.4.
mInfoIndex 1.116.5.3
9.2.2.4.1.
1
72 bladeInfoDim .1.3.6.1.4.
mInfo1Exist 1.116.5.3
9.2.2.4.1.
2
73 bladeInfoDim .1.3.6.1.4.
mInfo1Capa 1.116.5.3
city 9.2.2.4.1.
3
74 bladeInfoDim .1.3.6.1.4.
mInfo1Type 1.116.5.3
9.2.2.4.1.
4
75 bladeInfoDim .1.3.6.1.4.
mInfo1Frequ 1.116.5.3
ency 9.2.2.4.1.
5
76 bladeInfoDim .1.3.6.1.4.
mInfo1CasL 1.116.5.3
atency 9.2.2.4.1.
6
(*7) "Not install" is shown if no server blade or no mezzanine card in the server blade is
installed; "Cannot get data" is shown if the processor mezzanine card data cannot be
obtained.
(*12) "non-exist" is shown if no server blade or no DIMM is installed. "unknown" is shown if
no information is obtained.
(*13) "0" is shown if no information is obtained, or if no server blade or no DIMM is installed.
(*14) "Not install" is shown if no server blade or no DIMM is installed. "Cannot get data" is
shown if no information is obtained.
OID Syntax
Display
String
Not-
Accessible
Not-
Accessible
Integer32
INTEGER
Integer32
Display
String
Integer32
Integer32
1599
Access Description
RO Shows the Product
Manufacture of the mezzanine
card installed in the second
slot in the server blade in the
slot shown in #5. (*7)
NA Show the information table on
DIMM installed in the server
blade.
NA Show the entry of the
information table on DIMM
installed in the server blade.
RO Show the index of the
information table on DIMM
installed in the server blade.
RO Shows the status of DIMM
installed in the first slot of the
server blade. One of the
following values is shown.
(*12)
1: exist
2: non-exist
3: unknown
RO Shows the capacity of DIMM
installed in the first slot of the
server blade. This value is
shown as 1 for 1 GB. (*13)
RO Shows the type of DIMM
installed in the first slot of the
server blade. (*14)
RO Shows the frequency of DIMM
installed in the first slot of the
server blade. This value is
shown as 1 for 1 Mhz. (*13)
RO Shows the column address
strobe (CAS) latency of DIMM
installed in the first slot of the
server blade. (*13)