Hitachi Compute Blade 2000 User Manual page 1628

(h) SNMP group (2/2)
Object
No.
identifier
22 snmpOutRe .1.3.6.1.2.1.1
adOnlys 1.23
23 snmpOutGe .1.3.6.1.2.1.1
nErrs 1.24
24 snmpOutGe .1.3.6.1.2.1.1
tRequests 1.25
25 snmpOutGe .1.3.6.1.2.1.1
tNexts 1.26
26 snmpOutSe .1.3.6.1.2.1.1
tRequests 1.27
27 snmpOutGe .1.3.6.1.2.1.1
tResponces 1.28
28 snmpOutTr .1.3.6.1.2.1.1
aps 1.29
29 snmpEnabl .1.3.6.1.2.1.1
eAuthenTra 1.30
ps
30 snmpSilent .1.3.6.1.2.1.1
Drops 1.31
31 snmpProxy .1.3.6.1.2.1.1
Drops 1.32
(*1) This object includes the information only on some interfaces.
OID Access
RO Shows the total number of outgoing PDUs
whose error status is readOnly.
RO Shows the total number of outgoing PDUs
whose error status is genErr.
RO Shows the number of outgoing "GetRequests"
messages.
RO Shows the number of outgoing "GetNexts"
messages.
RO Shows the number of outgoing "SetRequests"
messages.
RO Shows the number of outgoing "GetResponces"
messages.
RO Shows the number of outgoing Traps.
RO (*1) Shows whether or not to issue an
authentication-failure Trap.
· enable（1）
· disable（2）
RO Shows the total number of SNMP incoming
messages that were silently dropped because
the reply size was greater than the maximum
message size.
RO Shows the total number of SNMP incoming
messages including GetRequest-PDU,
GetNextRequest-PDU: power distribution unit,
GetBulkRequest-PDU.
SetRequest-PDU and InformRequest-PDU that
were silently dropped because the transmission
of the message to a proxy target failed in a way
that no response PDU could be returned.
1577
Description