Configuring advanced switching
Multi VLAN binding
Multi VLAN binding, also known as Multiple VLANs per port, allows access to shared resources
by stations that belong to different VLANs through the same port. This is useful in applications
such as multi-tenant networks, where each user has a personal VLAN for privacy. The whole
building has a shared high-speed connection to the ISP.
In order to accomplish this, the G450 enables multiple VLANs per port. The available Port
Multi-VLAN binding modes are:
Bound to Configured. The port supports all the VLANs configured in the switch
●
Statically Bound. The port supports VLANs manually configured on the port
●
Figure 31
shows these binding modes.
Figure 31: Multi VLAN Binding
Bind to Configured
The VLAN table of the port supports all the Static
●
VLAN entries and all the ports' VLAN IDs (PVIDs)
present in the switch
VLANs 1, 3, 5, 9, 10 coming from the bus are
●
allowed access through this port
All the ports in Bound to Configured mode support
●
the same list of VLANs
352 Administration for the Avaya G450 Media Gateway
Static Binding
The user manually
●
specifies the list of
VLAN IDs to be
bound to the port, up
to 64 VLANs
Default mode for all
●
ports
Only VLAN 9, and
●
any other VLANs
statically configured
on the port will be
allowed to access this
port