Synopsis: A 32-Bit Unsigned Integer Default - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
Where:
• name is the name of the subnet
• description is the name of the IP pool
3. Configure the leased time settings by configuring the following parameter(s):
Parameter
default { default }
maximum { maximum }
4. Configure the client and failover settings by configuring the following parameter(s):
Parameter
unknown-client { unknown-client }
failover-peer { failover-peer }
5. Add one or more IP ranges to the pool. For more information, refer to
(IPv4)".
6. Add one or more Option82 classes to the pool. For more information, refer to
Option 82 Class to an Address
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
7.
Section 7.3.11.3
Deleting an Address Pool (IPv4)
To delete an address pool, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the address pool by typing:
no services dhcpserver subnet-name name options ippool description
Where:
• name is the name of the subnet
• description is the name of the IP pool
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Deleting an Address Pool (IPv4)
Synopsis: A 32-bit unsigned integer
Default: 600
The minimum leased time in seconds that the server offers to the clients.
Synopsis: A 32-bit unsigned integer
Default: 7200
The maximum leased time in seconds that the server offers to the clients.
Synopsis: { allow, deny, ignore }
The action to take for previously unregistered clients
Synopsis: A string 7 to 15 characters long
The IP address of a DHCP peer server if a failover pool is created.
Pool".
IP Address Assignment
Description
Description
Section 7.3.13.2, "Adding an IP Range
Section 7.3.18.2, "Adding an
Chapter 7
247