Siemens RUGGEDCOM ROX II User Manual page 167

RUGGEDCOM ROX II
CLI User Guide
Section 5.10
Scheduling Jobs
The RUGGEDCOM ROX II scheduler allows users to create jobs that execute command line interface (CLI)
commands at a specific date and time, or in response to specific configuration changes. Typical applications
include scheduling the regular clearing of system logs, or performing periodic file transfers to remote servers.
There are two types of scheduled jobs:
• Periodic jobs are executed at a specified date and time.
• Config change jobs are executed only when a specific.
CONTENTS
• Section 5.10.1, "Viewing a List of Scheduled Jobs"
• Section 5.10.2, "Adding a Scheduled Job"
• Section 5.10.3, "Deleting a Scheduled Job"
Section 5.10.1
Viewing a List of Scheduled Jobs
To view a list of scheduled jobs, type:
show running-config admin scheduler
If jobs have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config admin scheduler | tab
admin
scheduler
scheduled-jobs
SCHEDULER JOB
NAME
----------------------------------------------------------------------------------
Backup
Clear Message Log
If no jobs have been configured, add jobs as needed. For more information, refer to
Scheduled Job".
Section 5.10.2
Adding a Scheduled Job
To add a scheduled job, do the following:
1. Make sure the CLI is in Configuration mode.
Navigate to admin » scheduler.
2.
3. Configure the following parameter(s) as required:
Parameter
{ scheduler-job-name }
Scheduling Jobs
JOB JOB
JOB TYPE MINUTE HOUR
periodic 1 -
periodic 5 5:00
Synopsis: A string 1 to 64 characters long
JOB JOB
DAY JOB DAY
MONTH MONTH WEEK
- - Monday
1 1 Monday
System Administration
JOB COMMAND
backupconfig
clearmessagelog
Section 5.10.2, "Adding a
Description
Chapter 5
121