Siemens RUGGEDCOM ROX II User Manual page 318

Chapter 8
Layer 2
Parameter
NOTE
Once a VLAN ID has been assigned to a switched Ethernet port, a VLAN is created and can be
configured in switch » vlans » all-vlans.
9. If the port is in switchport mode, configure the VLAN for the port. For more information, refer to
Section 8.5.4.2, "Configuring VLANs for Switched Ethernet
10. Configure the port security settings. For more information, refer to
11. Configure the spanning tree settings. For more information, refer to
Switched Ethernet Ports and Ethernet Trunk
12. Type commit and press Enter to save the changes, or type revert and press Enter to abort.
Section 8.1.3
Viewing Switched Ethernet Port Statistics
To view statistics collected for a specific switched Ethernet port, type:
show interfaces switch slot port port-stats
Where:
• slot is the name of the module location
• port is the port number (or a list of ports, if aggregated in a port trunk) for the module
A table or list similar to the following example appears:
ruggedcom# show interfaces switch lm1 1 port-stats
port-stats
in octets 6820
out octets 3086
in pkts 33
out pkts 18
error pkts 0
This table or list provides the following information:
Parameter
in-octets
out-octets
in-pkts
272
• ADVERTISE ONLY : the port will declare all VLANs existing in the switch (configured or
learned) but will not learn any VLANs.
• ADVERTISE and LEARN : the port will declare all VLANs existing in the switch
(configured or learned) and can dynamically learn VLANs.
Interfaces".
Synopsis: A 32-bit unsigned integer
The number of octets in received good packets. (Unicast+Multicast+Broadcast) and dropped
packets.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer
The number of octets in transmitted good packets.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer
The number of received good packets (Unicast+Multicast+Broadcast) and dropped packets.
Description
Ports".
Section 6.6.2, "Configuring Port
Section 14.3.5, "Configuring STP for
Description
Viewing Switched Ethernet Port Statistics
RUGGEDCOM ROX II
CLI User Guide
Security".