Siemens RUGGEDCOM ROX II User Manual page 116

Chapter 4
Device Management
• Section 4.10.4, "Managing Diagnostic Logs"
• Section 4.10.5, "Managing Remote Syslog Servers"
• Section 4.10.6, "Managing Remote Server Selectors"
Section 4.10.1
Viewing Logs
Select logs can be viewed directly within the CLI. Otherwise, these and other logs can be downloaded from the
device and viewed in a text editor/viewer.
NOTE
For information about downloading log files from the device, refer to
To view a log in the CLI, do the following:
show log file
Where:
• file is the log file to view
For example, to view the auth.log, type:
show log auth.log
A result similar to the following is displayed:
ruggedcom# show log auth.log
Jan 29 09:25:00 ruggedcom confd[2068]: audit user: admin/0 failed to login using externalauth:
authentication
Jan 29 09:25:00 ruggedcom confd[2068]: audit user: admin/0 logged in through Web UI from 192.168.0.200
Jan 29 09:25:00 ruggedcom confd[2068]: audit user: admin/32 assigned to groups: admin
Jan 29 09:25:01 ruggedcom CRON[4599]: pam_unix(cron:session): session opened for user root by (uid=0)
.
.
.
Section 4.10.2
Deleting Logs
To delete all logs stored on the device, type:
admin delete-logs
Section 4.10.3
Configuring Secure Remote Syslog
Secure remote syslog encrypts all system logs sent to syslog servers using an Secure Sockets Layer (SSL) certificate
signed by a Certified Authority (CA).
70
RUGGEDCOM ROX II
CLI User Guide
Section 4.9.2, "Backing Up
Viewing Logs
Files".
Local