Siemens RUGGEDCOM ROX II User Manual page 108

Chapter 4
Device Management
Parameter
pm-slot
mov-protection
pm-temperature
pm-current
pm-voltage
Section 4.3
Viewing the Parts List
To view a list of parts installed in the device, type:
show running-config chassis part-list
If jobs have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config chassis part-list | tab
MODEL ORDERFIELD
--------------------------------------------------------------------------------
RX5000 16TX01
RX5000 4CG01
RX5000 4CG02
RX5000 4FG01
RX5000 4FG02
RX5000 4FG03
RX5000 4FG04
62
Synopsis: { pm1, pm2 }
The name of the power module slot as labeled on the chassis.
Synopsis: { na, working, damaged }
The state of the MOV protection circuit.
Synopsis: A 32-bit signed integer between -55 and 125
The temperature (Celsius) inside the power module.
Synopsis: A 32-bit signed integer between 0 and 15000
The current (mA) sourced by the power module.
Synopsis: A 32-bit signed integer between 0 and 15000
The voltage (mV) sourced by the power module.
PARTNUMBER
12-86-0010-001 16x 10/100TX RJ45
12-86-0015-001 4x 10/100/1000TX RJ45
12-86-0203-001
12-86-0203-001
12-86-0015-001 4x 10/100/1000TX microD
12-86-0204-001
12-86-0204-001
12-86-0015-001 4x 1000SX Multimode 850nm LC 500m
12-86-0202-043
12-86-0202-043
12-86-0015-001 4x 1000SX Singlemode 1310nm SC 10km
12-86-0202-021
12-86-0202-021
12-86-0015-001 4x 1000LX Singlemode 1310nm LC 10km
12-86-0202-041
12-86-0202-041
12-86-0015-001 4x 1000LX Singlemode 1310nm SC 25km
12-86-0202-022
12-86-0202-022
Description
PARTNAME
RUGGEDCOM ROX II
CLI User Guide
Viewing the Parts List