Table of Contents
Advertisement
RUGGEDCOM ROX II
CLI User Guide
IP Address Assignment
This chapter describes features related to the assignment of IP addresses, such as DHCP and DNS.
CONTENTS
•
Section 7.1, "Managing IP Addresses for Routable Interfaces"
•
Section 7.2, "Managing the DHCP Relay Agent"
•
Section 7.3, "Managing the DHCP Server"
•
Section 7.4, "Managing Static DNS"
Section 7.1
Managing IP Addresses for Routable Interfaces
This section describes how to manage IP address for routable interfaces.
CONTENTS
•
Section 7.1.1, "Configuring Costing for Routable Interfaces"
•
Section 7.1.2, "Viewing Statistics for Routable Interfaces"
•
Section 7.1.3, "Managing IPv4 Addresses"
•
Section 7.1.4, "Managing IPv6 Addresses"
•
Section 7.1.5, "Configuring IPv6 Neighbor Discovery"
•
Section 7.1.6, "Managing IPv6 Network Prefixes"
Section 7.1.1
Configuring Costing for Routable Interfaces
To configure the costing for a routable interface, do the following:
1.
Make sure the CLI is in Configuration mode.
2.
Set the costing by typing:
ip interface bandwidth cost
Where:
• interface is the name of the routable interface
• cost is the value used in auto-cost calculations for the routable logical interface in kbps
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Managing IP Addresses for Routable Interfaces
Chapter 7
IP Address Assignment
211
Hide quick links:
Advertisement
Chapters
Table of Contents
