Siemens RUGGEDCOM ROX II User Manual page 83

RUGGEDCOM ROX II
CLI User Guide
Parameter
file scp-config-to-url current-
filename user@host:/path/new-
filename
file scp-featurekey-from-url
user@host:/path/current-filename
new-filename
file scp-featurekey-to-
url current-filename
user@host:/path/new-filename
File Commands
standard_config.txt
7.5KB/s 00:00
Securely copies a configuration file from the device to a remote computer. The remote
computer must have an SCP or SSH (secure shell) service or client installed and running.
To use this command, the user credentials for the remote computer, the IP address or host
name of the remote computer, the directory path to the configuration file on the remote
computer, and the configuration file filename must all be known.
Type the command in the following format:
file scp-config-to-url current-filename user@host:/path/new-
filename
Where:
• current-filename is the current filename of the configuration file.
• user is a user name with access rights to the remote computer.
• host is the host name or IP address of the remote computer.
• path path specifies where to save the configuration file on the remote computer.
• new-filename is the new filename for the configuration file. To use the current
filename, specify the current filename or exclude this parameter from the command.
When prompted, type the password to connect to the remote computer. For example:
ruggedcom# file scp-config-to-url default_config
jsmith@10.200.20.39:/c:/ruggedcom/default_config
jsmith@10.200.20.39's password:
standard_config.txt
7.5KB/s 00:00
Securely copies a feature key file from a remote computer to the device. The remote
computer must have an SCP or SSH (secure shell) service or client installed and running.
To use this command, the user credentials for the remote computer, the IP address or host
name of the remote computer, the directory path to the feature key file on the remote
computer, and the feature key file filename must all be known.
Type the command in the following format:
file scp-featurekey-from-url current-filename user@host:/path/new-
filename
Where:
• user is a user name with access rights to the remote computer.
• host is the host name or IP address of the remote computer.
• path path is the path to the feature key file on the remote computer.
• current-filename is the current filename of the feature key file.
• new-filename is the new filename for the feature key file. To use the current filename,
specify the current filename or exclude this parameter from the command.
When prompted, type the password to connect to the remote computer. For example:
ruggedcom# file scp-featurekey-from-url jsmith@10.200.20.39:/c:/
ruggedcom/1_cmRX1K-12-11-0015.key 1_cmRX1K-12-11-0015.key
jsmith@10.200.20.39's password:
1_cmRX1K-12-11-0015.key
0.2KB/s 00:00
Securely copies a feature key file to a remote computer from the device. The remote
computer must have an SCP or SSH (secure shell) service or client installed and running.
To use this command, the user credentials for the remote computer, the IP address or host
name of the remote computer, the directory path to the feature key file on the remote
computer, and the feature key file filename must all be known.
Type the command in the following format:
Using RUGGEDCOM ROX II
Description
100% 7673
100% 7673
Chapter 2
100% 192
37